This site uses some unobtrusive cookies to store information on your computer. By using the website, you hereby agree on cookies storage.
The B-Series Elevated Head Dia-Vac® pump is an alternative to the electrically heated version.
With the ultra strong G-10 spacer; the pump head can be mounted into a heated enclosure while the pump motor remains outside at ambient temperature. Either high temperature Valox or Aluminum spacers (>176°C/350°F) insulate the bearings from the heat, while keeping the gaseous media from condensing inside the pump head.
Maximum permissible temperature for the pump head is 200°C (400°F).
ADI’s gas sampling Dia-Vac® Pumps can pass your gas at the speed of need! Due to an increased interest in reducing the pressure, vacuum, and/or flow on the Dia-Vac® pumps, our engineers designed a modified eccentric design.
This allows you to customize your Dia-Vac® pump to meet your application requirements while at the same time increasing the diaphragm and bearing life. The standard eccentric size is 0.160 on the B-Series Dia-Vac® Pump.
Please note that the chart below is not meant to be read as a combination of pressure and vacuum at the same time, only pressure or vacuum.
(Please click on individual Model # for actual performance curves)
|Model #||PSIG (Max Pressure)||Bar Gauge (Max Pressure)||InHg Gauge (Ultimate Vacuum)||Mbar Gauge (Ultimate Vacuum)||SCFM (Max Flow)||SLPM (Max Flow)|
|B162 (Para/Series)||34.3 / NA||2.36 / NA||22.2 / 27.5||752 / 931||0.45 / 0.26||12.6 / 6.4||Downloads|