ADI’s gas sampling Dia-Vac® Pumpscan pass your gas at the speed of need! Due to an increased interest in reducing the pressure, vacuum, and/or flow on the Dia-Vac® pumps, our engineers designed a modified eccentric design. This allows you to customize your Dia-Vac® pump to meet your application requirements while at the same time increasing the diaphragm and bearing life. The standard eccentric size is 0.160 on theJ-Series Dia-Vac® Pump.
Please note that the chart below is not meant to be read as a combination of pressure and vacuum at the same time, only pressure or vacuum.
J-Series Dia-Vac®
Flow Averages
(Please click on individual Model # for actual performance curves)
| Model # | PSIG (Max Pressure) | Bar Gauge (Max Pressure) | InHg Gauge (Ultimate Vacuum) | Mbar Gauge (Ultimate Vacuum) | SCFM (Max Flow) | SLPM (Max Flow) | |
|---|---|---|---|---|---|---|---|
| J081 | 10.5 | 0.7 | 16.4 | 555 | 0.24 | 6.7 | J081.pdf |
| J081-Metric | J081_Metric.pdf | ||||||
| J101 | 14.5 | 1 | 19.2 | 650 | 0.31 | 8.8 | J101.pdf |
| J101-Metric | J101_Metric.pdf | ||||||
| J121 | 20.9 | 1.44 | 21 | 711 | 0.37 | 10.6 | J121.pdf |
| J121-Metric | J121_Metric.pdf | ||||||
| J141 | 25 | 1.72 | 22 | 745 | 0.44 | 12.5 | J141.pdf |
| J141-Metric | J141_Metric.pdf | ||||||
| J161 | 31.1 | 2.14 | 24.4 | 826 | 0.49 | 14 | J161.pdf |
| J161-Metric | J161_Metric.pdf |