E-Series Dia-Vac® Pump Heated Head

The E-Series Heated Head Dia-Vac® pump provides all of the excellent features of the standard E-Series Dia-Vac® pump but has the added ability to electrically heat the pump head chamber to keep the gas temperature above the dew point.

This is an ideal pump for hot/wet extraction systems required to precisely control the temperature of the gas all the way through the pump and into the gas analyzer, up to 200°C. The head is made from 316 stainless steel and equipped with (2) 75 watt cartridge heaters and a K-type thermocouple, fixed thermostat or PT100 RTD.

*Note that the thermocouple and RTD options require an external temperature controller (sold separately).

ADI’s gas sampling Dia-Vac® Pumpscan pass your gas at the speed of need! Due to an increased interest in reducing the pressure, vacuum and/or flow on the Dia-Vac® pumps, our engineers designed a modified eccentric design. This allows you to customize your Dia-Vac® pump to meet your application requirements while at the same time increasing the diaphragm and bearing life.

Please note that the chart below is not meant to be read as a combination of pressure and vacuum at the same time, only pressure or vacuum.

Model #	PSIG (Max Pressure)	Bar Gauge (Max Pressure)	InHg Gauge (Ultimate Vacuum)	Mbar Gauge (Ultimate Vacuum)	SCFM (Max Flow)	SLPM (Max Flow)
E251	15	1	23	779	5.35	152	E251.pdf
E251-Metric							E251_Metric.pdf

Head Connection Schematics

drawing

parts

instructions

E Series Brochure

CAPACITY	WETTED MATERIALS	MOTOR	OPTIONS
STYLE	ECC.	HEADS	HEAD	DIAPHRAGM	TYPE	VOLTS	Hz	OPTIONS
E=E-Series	25	1	F=316ss	P=All Teflon	A= General Purpose	A=115	1=60 1Ph	• M=Heated w/K Thermocouple
				L=Silconert®316ss	F= XP/ATEX/IIC	B=230	2=50 1Ph
					N= XP (Grp CD UL)

E-Series Dia-Vac® Pump Heated Head

E-Series Performance

Single Head

drawing

parts

instructions

Downloads

E Series Brochure

How to Order